WoodRiver Snap-Set Miter Gauge Fence Combo with Flip-Stop

WoodRiver Snap-Set Miter Gauge Fence Combo with Flip-Stop, 163732, Positive stops at 0°, 22.5°, 30°, 45°, 60°, 67.5° and 90° in both directions, Adjustable miter bar fits snug inside standard 3/4" x 3/8" miter slots, 17-1/2"-long anodized aluminum fence rail adjusts along miter gauge head, Flip-stop adjusts along the fence for repeatable accuracy, You will find that Angle adjustments are a “snap” with the Snap-Set Miter Gauge and Fence System! This System is comprised of a precision pivoting miter gauge made from steel plate, and it features 13 positive stops at 0°, 22-1/2°, 30°, 45°, 60°, 67-1/2° and 90° in both directions. These positive stops are simple to adjust with a spring-loaded plunger stop that “snaps” in the machined holes. Any angle between 0°-90° can also be set as needed with WoodRiver Snap-Set Miter Gauge Fence Combo with Flip-Stop - 163732 by WoodRiver You will find that Angle adjustments are a “snap” with the Snap-Set Miter Gauge and Fence System! This System is comprised of a precision pivoting miter gauge made from steel plate, and it features 13 positive stops at 0°, 22-1/2°, 30°, 45°, 60°, 67-1/2° and 90° in both directions. These positive stops are simple to adjust with a spring-loaded plunger stop that “snaps” in the machined holes. Any angle between 0°-90° can also be set as needed with the large clamping knob. A 17-1/2"-long clear anodized aluminum alloy fence is fitted with an adjustable flip-stop for repeatable accuracy. The fence can be calibrated easily by sliding along the miter gauge head and held true with two thumb screws. The miter bar can be fitted to a standard 3/4" x 3/8" table slot using unique spring-loaded rollers that keep the bar tight against one side of the miter slot. A T-slot washer is included for wider crosscut operations. You can trust the Snap-Set Miter Gauge and Fence System to improve safety and accuracy when crosscutting or cutting miters on the table saw, as well as when routing end grain or miters on the router table.

Positive stops at 0°, 22.5°, 30°, 45°, 60°, 67.5° and 90° in both directions

Adjustable miter bar fits snug inside standard 3/4" x 3/8" miter slots

17-1/2"-long anodized aluminum fence rail adjusts along miter gauge head

Flip-stop adjusts along the fence for repeatable accuracy

Improve safety and accuracy on the table saw and the router table

UPC: 844788055377 PA34-05 miter, mitre, gauge, gage, index

Returns Accepted for this item if it's within 30 Days